[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) Voltage dip
Is the thermal on the motor wired to work? My tractor with regular control
does not get that hot.
>
> From: "Ralph G Vogan" <ctr84275 CenturyTel net>
> Date: 2004/05/10 Mon PM 02:33:02 EDT
> To: "Elec-Trak" <elec-trak cosmos phy tufts edu>
> Subject: (ET) Voltage dip
>
> I was wondering if anyone in the group has had this problem. I
> installed the AllTrex controller and it seems ot be working good. I
> have cut the grass 3 time now and several times durring each cutting the
> volt meter will drop into the middle of the red and everthing slowes
> down. The current meter drops a little too so I don't think its a
> short. It acts like I am suddenly running on only 4 or 5 batteries
> instead of 6. After 10 to 30 seconds it returns to normal. Sometimes
> it happens when I go from forward to reverse or back to forward again.
> It allways happens when I first start the tractor, mower running or not.
> If I just run the mower with the AllTrex off it will still read in the
> red. All battery cables and connectors are new. Batteries are 2 years
> old, and nothing is hot when I finnish cutting the grass. The drive
> motor is hot to touch but you can leave your hand on it for about 10
> seconds.
>
> Ralph Vogan
> ralphgv centurytel net
>
>
>
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak