[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Mower Deck Questions




thanks to all for the help!

-----Original Message-----
From: Rob Brockway
Sent: Apr 28, 2004 7:56 PM
To: steve39 mindspring com, elec-trak cosmos phy tufts edu
Subject: Re: (ET) Mower Deck Questions

When I switched from rear discharge to side on my 12M, I bought a baffle kit and discharge chute from Bill.
Rob, NH

steve39 mindspring com wrote:
hi all. I have an E-16 with the standard front mounted deck. Looks like there is an opening on the right side (closed but its there) that would allow for side discharge. Do you have to remove the baffles to do this, and if so, is that it or is there a different baffle set?

About to send all 3 motors into Bill for a rebuild. Running the original bearings circa 1972 (can't say he didn't warn me). Right motor is cutting off alot now and either the motor or the blade is much much louder than the left and center. Sounds to me like blade noise but it doesn't appear to be bent or whatever. Thoughts on that appreciated also.


Regards,

Steve
E-16, mower, tiller, sleeve hitch and disk
Middle Tennessee


_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak


Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs