[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) hubs
- Subject: Re: (ET) hubs
- From: "RJ Kanary" <rjkanary nauticom net>
- Date: Mon, 18 Nov 2002 13:01:46 -0500
- References: <3DD927A0.1050600@realns.com>
- Sender: owner-elec-trak cosmos phy tufts edu
What was the first clue ? <G> Reminds me of an episode with a hot wash
machine we have in the shop. The pump motor gave up the ghost, and the pump
had to be torn down to remove the motor. The manufacturer assured me that
the bronze impellor was attached with a left hand thread. WRONG
!!!!!!!!!!.
Good thing the Heli Coil® was invented !
RJ Kanary Bandi Bros. Inc.
Member TRNi Since 1998
ASE® Certified Master Auto Technician
rjkanary nauticom net
----- Original Message -----
From: "Neil Dennis" <wombat RealNS com>
To: "Elec-trak" <elec-trak cosmos phy tufts edu>
Sent: Monday, November 18, 2002 12:47 PM
Subject: (ET) hubs
> Never pulled a hub on the et but the hubs on my john deere are screwed
> on to the motor shaft (dan't ask). Don't pull worth a darn.
>
> wombat
>
>
>