Re: (ET) E15 in progress

["SteveS" <ssawtelle fcc net>]

I believe Bill Gunn has them.

I made up my own rear roller out of individual plastic wheels and spacers.
Seems to work pretty well, though I haven't used it much yet. About $20 in
parts and a bit of machining to drill the hubs out. Definately unoriginal.

Mine was missing the front roller too. Must be a reason for this. Is it 
weak
(breaks off) or does it get in the way (removed)? Since it must stick out 
in
front of everything, perhaps it gets broken after years of serving as
'bumper'. Mine seems to work fine without it.

SteveS
E12S


----- Original Message -----
From: "Rod Hower" <rodhower ameritech net>
To: <>
Sent: Tuesday, August 06, 2002 12:55 AM
Subject: (ET) E15 in progress


> I worked on the ET tonight and took a few pics.
> I put an updated photo at my site,
> hower.iwarp.com/photo.html
>
> The Rims are painted, but the rest needs some
> New Holland Yellow.
>
> The wooden rollers on the back of the mowing
> deck are in nasty shape.  Any suggestions on where
> I can get replacements?  Not looking for original, just
> something that will be functional.  Also, there is
> no roller on the front?  What should I put there?
>
> Thanks,
> Rod
>
>