[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ET) Front Mower Lift
- Subject: RE: (ET) Front Mower Lift
- From: "Elie, Larry (L.D.)" <lelie ford com>
- Date: Mon, 4 Mar 2002 09:45:41 -0500
- Hop-count: 1
- Sender: owner-elec-trak cosmos phy tufts edu
If you are using the lift springs, 3-batteries (18V nominal) should lift
it fine. Of course, 3 charged batteries should be putting out 19.5 to
21V... down at 18V and it won't lift well. You can modify the attachment
point and double up the strap like one does for the blower and tiller just
like a block and tackle. You will have to make a pulley at the mower, but
then you can lift it somewhat better.
Larry Elie
-----Original Message-----
From: habooly earthlink net [mailto:habooly earthlink net]
Sent: Saturday, March 02, 2002 2:01 AM
To: ELECTRAK
Subject: (ET) Front Mower Lift
Is the front mower lift motor the same as a GM power window (12 volt)motor?
I have mine wired to pull 24 volts instead of 18 volts and it still won't
lift the mower all the way.
Any suggestions?