(ET) Weeder / Cultivator

["Pestka, Dennis J" <Dennis Pestka mkg com>]

Talked with Bill Gunn about the Weeder / Cultivator and found out the
following information:

First he has no documentation on the unit.
He does have parts: bushings, brushes, armatures, etc.

When you dismantle the unit check the lower gear box grease. After many
years it dries out. Replace with a light weight grease.
He couldn't give me any spec on it but suggested matching the exist grease
if any was still in the case.

Take the sleeve bushings out, clean and then soak in a 30W oil to get oil
back in the pores.

Heat may be needed to remove tiller tines.

Dennis