RE: (ET) Seat mounting pattern?

["Hazen, Dwight L" <hazen indiana edu>]

Larry,

 The web address www.jacksonsadlles.com  is not working, is that correct? 

 The seat (foam and vinyl part) un-bolt from the metal seat frame. Two
screws on the under edge of the seat frame need to be removed. All you
should have to do is drill the new seat frame to fit the tractor. Do not
drill new holes in the tractor. After you remove the vinyl seat you will
discover that you can adjust your seat back and forth by using different
bolt holes. 

You might just have a new seat cover made. any good shop should be able to
sew one up for you. (be sure and replace the foam).

 Hope this helps.

  Dwight 



Dwight L. Hazen, Indiana University, UITS 
Bloomington, In. 47408-7378 Phone 812-855-5367 hazen indiana edu
http://php.ucs.indiana.edu/~hazen/ Ham Radio wb9tlh arrl net




> -----Original Message-----
> From: Elie, Larry (L.D.) [SMTP:lelie ford com]
> Sent: Thursday, January 25, 2001 12:07 PM
> To:   elec-trak cosmos5 phy Tufts edu
> Subject:      (ET) Seat mounting pattern?
> 
> I'm getting tired of my torn seats...
> 
> I did an altavista search, then an e-mail and got this;
> 
> "
> We suggest you visit www.jacksonsadlles.com They offer our seats for
> after-market purposes and will sell them to you one or two at a time.
> Can't
> help with bolt patterns and such from 1970. That's way before my time.
> 
>