[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Re: painting mower deck...

Subject: Re: (ET) Re: painting mower deck...
From: "Jim (Cape Cod USA)" <fiskfarm mediaone net>
Date: Thu, 10 Aug 2000 21:18:44 -0400
Organization: Suds & Service
References: <20000727.172251.-738141.0.Russell239@juno.com> <3980C0EE.94BD87F8@mediaone.net> <000201bff8cb$c528d3e0$b3bc1a18@mn.rr.com> <3982EDA7.B85D6273@speakeasy.org> <398D9418.C41C84A9@speakeasy.org> <398E2471.FDD3CC64@mediaone.net> <398EDA0D.64A0AE0F@speakeasy.org>
Reply-to: fiskfarm mediaone net
Sender: owner-elec-trak cosmos5 phy tufts edu

Sorry Dave to take so long to answer. We moved our home office and were
down for a few days and busy catching up for a few more..

BreakAway or oil. Spray it on the drain holes from underneath
occasionally unless the batteries are out, then paint the box with old
wheel grease. I rebuild commercial washers with about 6-8 inch bearings
and save the old (but good) bearing grease for such purposes. Nothing
stops rust like grease and oil.

Jim

References:
- Re: (ET) Trouble with battreis, speed control, and mower???
  - From: D. Russell Graves
- Re: (ET) Trouble with battreis, speed control, and mower???
  - From: Jim (Cape Cod USA)
- Re: (ET) Trouble with battreis, speed control, and mower???
  - From: MR23 (Christopher M. Meier, Mpls, MN)
- Re: (ET) Trouble with battreis, speed control, and mower???
  - From: dave barden
- (ET) painting mower deck...
  - From: dave barden
- (ET) Re: painting mower deck...
  - From: Jim (Cape Cod USA)
- Re: (ET) Re: painting mower deck...
  - From: dave barden

Prev by Date: Re: (ET) E-20 mower deck sale
Next by Date: (ET) uh-oh what'd I do now...
Previous by thread: Re: (ET) Re: painting mower deck...
Next by thread: Re: (ET) Trouble with battreis, speed control, and mower???
Index(es):
- Date
- Thread