Re: (ET) Belts

["MR23 \(Christopher M. Meier, Mpls, MN\)" <mr23 mn rr com>]

Well, if these show a problem I'll order some up from Bill.
As it is, the previous owner had 3L335's on it as well.

Christopher M. Meier


----- Original Message -----
From: "Steven Naugler" <snaugler earthlink net>
To: "elec-trak mailing list" <elec-trak cosmos5 phy tufts edu>; "MR23
(Christopher M. Meier, Mpls, MN)" <mr23 mn rr com>
Sent: Saturday, July 15, 2000 12:34 PM
Subject: Re: (ET) Belts


> Chris and other ET folks,
> The belts you need are 3V335 or 3VX335 (preferred for small diameter
> pulleys).  The 3L series NAPA sells won't fit correctly.  The V series
> belts were not used in automotive applications, and that is why NAPA and
> other convenient sources don't have them.  You can get them from
industrial
> power transmission companies such as KAMAN and possibly Grainger.  Or 
> from
> Bill at Technical Service.
>
> Steve Naugler
>
>
> > [Original Message]
> > From: MR23 \(Christopher M. Meier, Mpls, MN\) <mr23 mn rr com>
> > To: elec-trak mailing list <elec-trak cosmos5 phy tufts edu>
> > Date: 7/12/00 10:41:52 PM
> > Subject: Re: (ET) Belts
> >
> > I needed a new set of belts, quick, so I called NAPA Auto Parts (here 
> > in
> > Mpls), and they had 3L335 belts in stock, for $5.50 each.  If I had
needed
> > an Electrak specific part, I would have had Bill ship it, but didn't
seem
> > worth it to wait, plus ship a part that was a mile away from me...  <
$12
> > for the pair including sales tax.
> >
> > Christopher M. Meier
> >
> >
> > ----- Original Message -----
> > From: "Monty McGraw" <mmcgraw74 hotmail com>
> > To: "elec-trak mailing list" <elec-trak cosmos5 phy tufts edu>
> > Sent: Saturday, April 01, 2000 8:44 PM
> > Subject: Re: (ET) Belts
> >
> >
> > > I got the 3V335 belts from Bill Gunn at Technical Sales and Service
> > > for around $15 for the pair.
> > >
> > > Monty McGraw
> > >
> > > ----- Original Message -----
> > > From: Allan <allanhv worldnet att net>
> > > To: elec-trak mailing list <elec-trak cosmos5 phy tufts edu>
> > > Sent: Saturday, April 01, 2000 7:58 PM
> > > Subject: (ET) Belts
> > >
> > >
> > > > I would like to replace the belts on my E20, but can't seem to find
> the
> > > > proper replacement.  Does anyone have a part number or the actual
size
> > > > of the belts?  The only designation I can find is 3V335, which
doesn't
> > > > seem to mean anything to the places I've taken it.
> > > >
> > > > Thank you,
> > > > Allan
> > > >
> > > >
> > >
> >
>
>
>
> --- Steven Naugler
> --- snaugler earthlink net
>
>
>