[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ET) E-12S
- Subject: RE: (ET) E-12S
- From: "Hazen, Dwight L" <hazen indiana edu>
- Date: Fri, 12 May 2000 11:35:50 -0500
- Sender: owner-elec-trak cosmos5 phy tufts edu
A word of advice: NEVER, NEVER push that little lever arm inside the
controller with your finger while you are moving forward..
You have all seen the commercial on TV that says we all do dumb things
sometimes, believe it!
Dwight
Dwight L. Hazen, Indiana University, UITS
Bloomington, In. 47408-7378 812-855-5367 hazen indiana edu
http://php.ucs.indiana.edu/~hazen/ Ham Radio wb9tlh arrl net
> -----Original Message-----
> From: dave barden [SMTP:daveb speakeasy org]
> Sent: Friday, May 12, 2000 10:07 AM
> To: wombat
> Cc: electrak list
> Subject: Re: (ET) E-12S
>
> Darryl, Allan, Wombat, et al
>
> .
>
> The way to insure the relay is first in and last out is with the
> little
> arm below the direction/speed lever under the dash that can be bent.
>
> Before anyone tries this I strongly suggest you verify with Bill or
> someone who has done it before.
>
> thanks again,
> dave
>
> wombat wrote:
>
> > According to my service manual, the "12S" is the same motor hookup as
> the
> > "15" with the drive motor having a field winding. Not a PM motor like
> the
> > "12".
> >
> > wombat