[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: replacement parts

        Before you reproduce the brake disc or other parts on or in the
transmission be reminded that the Elec-Trak transmissions were
Peerless/Tehcumseh transmissions whose only modifications were the
elimination of reverse gearing.  (I am not sure if the caliper is from
Peerless or specific to the Elec-Trak, but the disc should be Peerless.)
Most of these parts should be available from any Peerless/Tehcumseh dealer.
A local John Deere dealer near me can supply me with any parts I need.

> ----------
> From:         Frank Neufell[SMTP:neufell endor com]
> Reply To:     neufell endor com
> Sent:         Wednesday, December 02, 1998 8:36 PM
> To:   elec-trak cosmos5 phy tufts edu
> Subject:      replacement parts
> Fellow elec-trak owners;  With spare parts becoming scarce & more
> costly, i have been reproducing a few for my own use. I
> have had good luck with my E12M and only had to make a few pins &
> bushings but i will need to make a brake disk soon.
> If anyone has any worn out parts that i could reproduce & improve on
> please let me know. I am retired but still own a small
> machine shop.I may be able to make repair parts cheaper than the dealers
> & make them avail. direct to elec-trak owners.
> Frank