[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) GE charger quit working after using accessory port

 Battery Charger circuit breaker (Red reset button marked "50" on upper control panel) is probably tripped. Reset by pushing in until you hear a click. Sometimes it takes a pretty hard push. If that is what happened, evaluate what you were running off the accessory receptacle to see if it has appropriate amp draw. 



On 12/2/2023 10:24 AM, David Roden wrote:

On 2 Dec 2023 at 9:02, Paul Anderegg wrote:


the GE standard charger that's in the machine it started vibrating
really bad and I later discovered no DC currents was coming out of it.

Sounds to me like one or both of the diodes in the charger is/are shorted.


David Roden - Akron, Ohio, USA

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Note: mail sent to the "etpost" address will not reach me.  To send
me a private message, please use the address shown at the bottom
of this page : http://www.evdl.org/help/
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =




_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak