Re: (ET) Wheel is here, time to repair

[Rob Brockway <getractor yahoo com>]

 What are the mower mulching plates?
    On Wednesday, November 8, 2023 at 09:24:53 PM EST, Chris Zach via 
Elec-trak <elec-trak cosmos phy tufts edu> wrote:  
 
 One thing I have to say about Harold: You need something, he identifies 
the right parts and sends them quickly. Just got my box with an entire 
front wheel (to replace the blown tire), 2 brake switches (wow they have 
strong springs) and a new brake pedal pivot part.

Sure enough it's a very tight fit for the brake part so I need to sand 
and burnish the hole to get rid of the rust in there, then I'll grease 
the hell out of it and put it in. But that will get my brakes back to 
snuff, and with the other repairs it looks like the E15 is a runner.

He didn't have any mower mulching plates, so I went through my shed and 
found mine. It's in fine shape, and oddly enough mounts up to just the 
top two screws without having to do the side as I have my custom 
stiffener bar using the bottom screw holes. Deck is solid as a rock.

Also found my spare charger, of course this is after I repaired my 
junker one with the new diodes. I should take a picture of that sometime.

Ready for fall. I'll mulch leaves, then aerate the lawn once it rains, 
then switch over to the vacuum to get all the stuff under bushes. Then 
it's time to drag out the snowblower and let the winter fun begin!


_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://cosmos.phy.tufts.edu/mhonarc/elec-trak/attachments/20231109/a5a82370/attachment.htm>