[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) exhibitor at a Farm Festival



Great story!  Thanks for sharing that.

On 2023-10-24 3:02 p.m., Mike Finck via Elec-trak wrote:
I have a fun story to tell. I was an exhibitor at the Centerburg Farm Festival this 
year. Took two fully restored E-20 tractors, one had the dozer  blade on and the other 
had front deck and rear tiller. Probably about 200 farm tractors and garden tractors on 
display. Many, many people commented “I have never seen such a thing!”
I laid awake in bed Sat night debating whether to enter the Garden Tractor pull on 
Sunday. Pro- probably never have another chance, and nobody would have “ever seen 
such a thing”. Con- have a breakdown and be embarrassed.
Well i did and it couldn’t have gone any better! First, the organizers couldn’t figure out what 
“class” to put me in and eventually they put me in my own class, Exhibition. After about an hour of 
these souped up, super loud, tires spinning, dirt flying, expensive, custom garden tractors completed their 
competition then it was my turn. They were pulling between 130-140,’ a couple made mid 140’s.
I had put my weight box on the rear, and had the chains on. I didn’t have to 
weigh in beforehand but i was curious, 1330#’s!
I had debated between LL gear or L and since you can’t stop (to change gears) or 
you’re done. I chose LL and got hitched up and started-absolutely quiet, no tire spin, 
and after 4minutes (an eternity in the pulling world) I got to 141.88’! I got some 
applause (also a rarity), uncoupled, and zipped off in D2. So now the E-20 and the ELECTRAK 
brand is part of the history of the Farm Festival!
Mike

Sent from my iPhone

On Oct 24, 2023, at 2:05 PM, Darryl McMahon <darryl econogics com> wrote:

The speed selector / F-R control handle came out in my hand last winter.

The issue was the drift pin (roll pin) had rusted out.

I couldn't find a matching size piece in my tray of assorted roll-pins, 
but I did have a cotter pin which was perfectly matched to the holes in 
the arms of the handle.

Anyway, all reassembled now and working fine, so snow plowing capacity is 
back on line for winter 2023-24.

Contact cleaner for the E15 control board edge connector should arrive 
late today.

I remain constantly grateful for this list and those that contribute to 
it.  I'm a long ways from Elec-Trak heartland, and my two working electric 
tractors still functional almost 50 years after manufacture continue to 
astonish those who encounter them.

Darryl

--
Darryl McMahon
Freelance Project Manager (sustainable systems)

Do not mistake patience for weakness, nor action for strategy.

--
This email has been checked for viruses by Avast antivirus software.
www.avast.com

_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak


_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak

--
Darryl McMahon
Freelance Project Manager (sustainable systems)

Do not mistake patience for weakness, nor action for strategy.