[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) Grass sticking to the deck.
My father and I used Meyer PLOW Yellow SNO-FLO Paint on the underside of
decks we've owned.
Jun 29, 2022 3:12:50 PM Larry Chace <RLC1 etnainstruments com>:
> Paul asked about sticky grass. I've observed the same effect. My deck
> is an "AA42RC", meaning that it was fitted with the rear discharge
> baffles ("R"); I don't know what the "C" implies.
>
> When I got the deck, it had no baffles, and so I used it as-was in rear
> discharge mode. (There have been suggestions that the baffles do little
> more than provide places for grass clippings to stick.) One day the side
> discharge cover came off after having rusted quite thoroughly. I
> started using it with the side discharge opening open. There did seem to
> be less build-up, though there was still quite a lot.
>
> Then the deck cracked in the vicinity of the discharge opening and right
> caster. (The cover had provided some degree of reinforcement until it
> rusted through.) A local machinist was able to weld the crack back
> together and he also fitted a reinforcing bar around the opening.
>
> Not being sure if it was safe to use a garden hose to rinse off the
> underside of the deck, I've been using plastic putty knives to srape off
> the clumps of clippings. And now one of the helper springs has broken,
> right where it attaches to the helper chain. (The deck did seem to lift
> rather slowly and incompletely...) If it's not one thing it's two...
>
> Larry Chace Ithaca, NY E15 and I-5
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak