(ET) Chris Zach

Subject: (ET) Chris Zach

From: "Robin Vasichek" <oleo7325 juno com>

Date: Fri, 5 Mar 2021 16:26:33 GMT

Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=juno.com; s=alpha; t=1614961679; bh=47DEQpj8HBSa+/TImW+5JCeuQeRkm5NMpJWZG3hSuFU=; l=0; h=From:Date:To:Subject:Message-Id:Content-Type; b=of2poGdv4X5CDLzQYOFo/C8jLwopdRWe5rCXOTsJwEmZrZRB5yytOO1uWyMEOCjQp ZyYc65t73pNytezrO6WkOVvIQmmcQForPITflajoYJQMDEzF4y4QJb1jWEa6Q7sR5a nwZlOcMFtBuwHMlWqzm43yXAeKD6g0KvgkBinmuA=

Full-name: "Robin Vasichek" <oleo7325 juno com>

List-archive: <http://cosmos.phy.tufts.edu/mhonarc/elec-trak/>

List-help: <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=help>

List-id: Electric tractor discussion list <elec-trak.cosmos.phy.tufts.edu>

List-post: <mailto:elec-trak@cosmos.phy.tufts.edu>

List-subscribe: <https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak>, <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=subscribe>

List-unsubscribe: <https://cosmos.phy.tufts.edu/mailman/options/elec-trak>, <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=unsubscribe>

Chris, sorry for replying this way. I can not see how to reply directly to a post. If you have a AD42BA snow thrower it sounds like you are missing a part. The motor fits against a plate bolted to the front of motor mount. Item #42 in the parts book. Part #244A7335P42. This is about 5" X 2" and about 1/8 thick. It is to hold the motor in the correct position to have the chain tensioner in the center of its travel. I just replaced the auger bearings on my AD42BA. The number is AS205-16. Very common bearing. Stainless shields on both sides and they come with a new lock collar. I do need to warn you these are the most difficult bearings I have ever replaced. I am a retired mechanic and have dealt with bearings my entire working life. I have all the bearing tools and the knowledge, but these are very hard to do.

RAV (DofTI)

____________________________________________________________