[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) C-185 Speed Issue
Yours is probably a B-145 which does have that switch...
On September 8, 2019 at 5:19pm -0400, you wrote:
>This exactly How many wheel horse acted and it was the centrifugal switch
>although I?m being told your model doesn?t have one?
>
>Sent from my iPhone
>
>> On Sep 8, 2019, at 3:40 PM, PH via Elec-trak <elec-trak cosmos phy
>> tufts edu> wrote:
>>
>> Hello Harold and all ETers who replied.
>>
>> With the transmission in neutral and pressing the speed pedal to the
>> metal, I only hear two clicks.
>> Pressing the cruse button increases speed.
>>
>> The SN plate lists 5700 and 115195. The 5700 is questionable since
>> the plate is painted over.
>>
>> Thanks again to all,
>> Paul
>>
>>
>>
>> On Saturday, September 7, 2019, 06:36:13 PM EDT, Harold Zimmerman -
>> Clean Power Supply <cleanpower mailbug com> wrote:
>>
>>
>> Could be the 2A switch in the speed control. How many speeds do you
>> have left?
>>
>> On September 7, 2019 at 4:02pm -0400, you wrote:
>>
>> >HI All ET EXPERTS,
>> >My C-185 has performed almost flawlessly since 1985.??
>> >But today when mowing, the top speed [pedal to the metal] seemed
>> >slightly slow.??I pressed Cruse button and speed increased??
>> >
>> >Could the high speed pedal switch be bad or is this a diode issue or
>> >other issue?
>> >Any advice is welcome.
>> >Thanks,Paul Holzschuher?Cincinnati
>> >
------------------------------------------------------------------
Sent from my MailBug email device. Info: 1-855-MAILBUG, mailbug.com