[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) C-185 Speed Issue



Hello Harold and all ETers who replied.

With the transmission in neutral and pressing the speed pedal to the metal, I only hear two clicks.
Pressing the cruse button increases speed.

The SN plate lists 5700 and 115195.  The 5700  is questionable since the plate is painted over.

Thanks again to all,
Paul



On Saturday, September 7, 2019, 06:36:13 PM EDT, Harold Zimmerman - Clean Power Supply <cleanpower mailbug com> wrote:


Could be the 2A switch in the speed control. How many speeds do you have left?

On September 7, 2019 at 4:02pm -0400, you wrote:

>HI All ET EXPERTS,
>My C-185 has performed almost flawlessly since 1985.??
>But today when mowing, the top speed [pedal to the metal] seemed slightly slow.??I pressed Cruse button and speed increased??
>
>Could the high speed pedal switch be bad or is this a diode issue or other issue?
>Any advice is welcome.
>Thanks,Paul Holzschuher?Cincinnati
>
>_______________________________________________
>Elec-trak mailing list
>Elec-trak cosmos phy tufts edu
>https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak

------------------------------------------------------------------
Sent from my MailBug email device. Info: 1-855-MAILBUG, mailbug.com

_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak