[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Bearings for the motors



          Remove the core from the valve stem before starting. Acetylene torch, arbor press, patience. Clean up and repaint, anti-seize before reassembly.         

          NOT for the faint of heart.


RJ


On 8/4/2019 9:48 AM, Pestka Dennis wrote:
A friend is also having trouble removing a hub mounted rear wheel from an E10M.
Any tips, tricks, suggestions on removing these ?

Thanks;
Dennis

From: Chris Zach <cz alembic crystel com>
Sent: Saturday, August 3, 2019 5:47 PM
To: Elec-trak list <elec-trak cosmos phy tufts edu>
Subject: (ET) Bearings for the motors
 
Ok, I got a shipment of 6203 and 6205 bearings. The 6203 ones (small)
seem to be a proper replacement for the top bearing on the fat motors.
The 6205 bearings seem to be a proper replacement for both bearings on
this blower motor.

I'll grab a bearing puller kit from HF tomorrow and see if/how they fit.
But looks pretty good for a start.

Also need to figure out how to pull the stupid hub adapter for mower
motors without wrecking threads or bending the hub adapter. Real pain in
the neck.

C

_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak

_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak