[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Ok, which way do the blades go?



Then I have them on right, thought so. Someday I'll figure out how this new deck got the harness wired up backwards....

Never a dull moment.

On 6/14/2019 1:10 PM, john j casey wrote:
Hey Chris,
Go to My Electraks and see bulletin GEZ-5182A , Mower Assembly-Rear 
Discharge….really good exploded diagram of the mower.
Then scroll all the way down to the Wheelhorse section for bulletin 810147R1 and find in the 
dialogue…”Install blades with the lift area (turned up section) facing the mower 
deck.”

Should clear thing up.

Cheers, Jack

On Jun 14, 2019, at 8:35 AM, Chris Zach <cz alembic crystel com> wrote:

Ah, maybe that's it. The reason is this:

In order to have the blades with the lowest tip point towards the grass I 
had to mount them so they spin CCW from the view of the bottom of the 
motor.

All three of my motors were spinning the wrong way when mounted in my new 
deck. I had to change the wires to make it fit properly.

Looking at the instructions included with my new blades it looks like the 
lowest point should be facing the motor, not the grass.

So maybe that's the way to do it for mid-mount decks, but not front-mount?

Meantime the new blades are nice. Much sharper and better balanced, there 
is still some vibration from one of my newer motors and I'll have to 
figure that out sometime. But lots better.

C


On 6/14/2019 7:20 AM, tb wrote:
According a couple of pictures in the factory Assembly  Procedure section, the 
tips of the blades point up—at least on the mid-mount deck. ;-)
Thon
On Jun 13, 2019, at 1:31 PM, Harold Zimmerman - Clean Power Supply 
<cleanpower mailbug com> wrote:


Chris,
The tips of the blades drop down to the grass.
Sincerely,
Harold Zimmerman

On June 13, 2019 at 1:29pm -0400, you wrote:

Wow, I got two answers, CCW from the top, and CCW from the bottom. Oi.

C

On 6/13/2019 10:27 AM, john j casey wrote:
As you sit on the seat it be counterclockwise.  Looking at the blade, the 
bent part (just opposite the nasty edge) is toward the motor.  How do I 
know this?when removing blade for sharpening I need a glove for the left 
hand.
Jack



On Jun 13, 2019, at 9:44 AM, Chris Zach <cz alembic crystel com> wrote:

When viewing the blades from underneath the deck, do they rotate clockwise 
or counterclockwise?

Are the blades mounted like this

  Motor
_------_
  Grass

Or this
_     _
-----
Grass

Thanks!
C

_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak


_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak

------------------------------------------------------------------
Sent from my MailBug email device. Info: 1-855-MAILBUG, mailbug.com

_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak


_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak