Hello everyone. New to this email list. Having troubles with my
tractor.
A couple of weeks ago went out to mow and nothing, no forward, no
reverse, some clicking (small 2A contactor). Had just mowed day before
and it had been mowing for well over a month prior to this with no
issues. The things I notice? The key switch passes it's test across
the terminals, but once it is turned on, things test wacky with
voltage doing pretty much the opposite than it should...voltage up
with key off. When key is turned on, it drops to nothing. Isolated the
main wire to the relay (2RTN) and when the key is off it reads 34 V
and when on, zero.
Installed new RTN's today. They look beautiful and are working as they
should however, it did not fix the problem. We are still getting
voltage at the fuel gauge when the key is off. We did see a change
with the new RTN's in that the voltage on the fuel gauge doesn't drop
when key is turned on. Looking at the schematics in Simplified
Troubleshooting- it seems negative current is being drawn up into the
fuel gauge when it shouldn't be, activating it when the key is off. We
tested the motor and field and got the following= Test 19-Wires 62 and
22 Plug 3. Get around 16 volts at all speeds. All of the remaining
tests-20-24, we get nothing. We had the key on for awhile and noticed
that the small 2a contactor got hot which is the main one that clicks
when the key is turned on. FYI-I have the new single contactors
replacing the double pole and a Curtis controller also. I have
continuity between the armature studs. Mystified. PTO works good.
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak