[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

(ET) Power Pulse Required Most of the Time

Subject: (ET) Power Pulse Required Most of the Time
From: "Mark Mitchell" <mmitch8563 bex net>
Date: Sun, 9 Oct 2016 00:09:13 -0400
List-archive: <http://cosmos.phy.tufts.edu/mhonarc/elec-trak/>
List-help: <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=help>
List-id: Electric tractor discussion list <elec-trak.cosmos.phy.tufts.edu>
List-post: <mailto:elec-trak@cosmos.phy.tufts.edu>
List-subscribe: <https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak>, <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=subscribe>
List-unsubscribe: <https://cosmos.phy.tufts.edu/mailman/options/elec-trak>, <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=unsubscribe>
Thread-index: AdIh4uURHPKQEh8lSvmv//NwIbyhpg==

I have an E16 that requires the power pulse in order to get the higher speeds. It works as designed mostly with a fresh charge

or very little load. Batteries are newer (1 year old). I replaced the contact set on the 2AH relay and verified operation of the 2A contactor. Someone had mentioned that a high resistance in the 2AH coil circuit could cause this. Any ideas??? Thanks!

Follow-Ups:
- Re: (ET) Power Pulse Required Most of the Time
  - From: Christopher Zach

Prev by Date: Re: (ET) can't get out of 1st speed
Next by Date: (ET) Stuff for sale in MA
Previous by thread: Re: (ET) can't get out of 1st speed
Next by thread: Re: (ET) Power Pulse Required Most of the Time
Index(es):
- Date
- Thread