So it looks like the troubleshooting manual disagrees with itself
page 21 of my manual, dated 11-72, the schematic shows wire 8 on pin 7 of card 1, while the control panel layout shows wire 6 on pin 7.
I guess the question is, is there a problem, and should I fix it? With my limited knowledge it 'seems' like wire 8 is a better idea.
Just checked my E12S it also has wire 6 on pin 7
On 2015-04-29 22:26, stupidemail5 lycos com wrote:
26AE15CB
MN22379
I have the hsm on pdf and paper, the troubleshooting guide pdf and paper and the full green looseleaf binder of the dealer manual
most places call for pin 7 to be wire 8 except for the one place in the troubleshooting guide that lists it as wire 6 but it is only a partial
On 2015-04-29 22:07, RJ Kanary wrote:
Physical locations of the numbered wires on the numbered pads are available on Page 5-26 on Paper, Page 132 in .PDF.
RJ
On 4/29/2015 2:46 PM, stupidemail5 lycos com wrote:
Umm, I have all of the manuals, although I am not looking at all of them now, but that is why I know the wiring diagram says it should be wire 8 and it is in fact wire 6. This is an original AFAIK unmodified machine. The original connectors used on the card edge fell off the card from just opening the panel, and are brittle so I have replaced them with a 'real' edge card connector, and in the process of doing so kept track of the wire numbers thus discovering the anomaly
Is there an earlier/later wiring diagram that shows this as normal?
On 2015-04-29 17:43, RJ Kanary wrote:
Do you possess a Homeowners Service Manual? If not, I can PM you some helpful illustrations.
RJ
On 4/29/2015 12:54 PM, stupidemail5 lycos com wrote:http://www.elec-trak.com/forum/showthread.php?5605-My-recent-Ebay-find-barely-used
this is the machine
On 2015-04-29 15:54, RJ Kanary wrote:
The information on the plate riveted to the front battery compartment would be most helpful...... :)
RJ
On 4/29/2015 11:44 AM, stupidemail5 lycos com wrote:
Mine seems to have wire 6 where wire 8 wants to be [pin 7] and it rings out to be wire 6 and is labelled as such
This is on the machine I just bought and I have not run it, and it has not run in a very long time
ideas?
_______________________________________________ Elec-trak mailing list Elec-trak cosmos phy tufts edu https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
This email has been checked for viruses by Avast antivirus software.
www.avast.com
This email has been checked for viruses by Avast antivirus software.
www.avast.com
_______________________________________________ Elec-trak mailing list Elec-trak cosmos phy tufts edu https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak