[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Circuit breaker in lift motor?



Hey, thanks, guys.  I'll pull it apart this evening.  It makes no
sense to me to have a CB in there, I'd rather use a properly sized
dash fuse or breaker instead.

RJ, has that 25 amp fuse ever blown?

Chris, if I put the motor at 36 volts, won't that make it run faster?
I want the bloody thing to run SLOWER, not faster, since it has no
limit switches for some reason.

I suppose I should try to figure out how to put a limit switch on it,
so it'll stop when the mowing deck is all the way up.

--Charlie

On Wed, Apr 30, 2014 at 7:05 PM, CZ Unit <cz alembic crystel com> wrote:
> On 4/30/2014 6:50 PM, Charlie wrote:
>>
>>    I decided to fix the dead front lift on my I5 last Sunday and spent
>> a few hours with the schematic and a voltmeter.  It turns out that the
>> switches, wires and fuse are all good, but the motor (which has
>> nothing visibly wrong with it) doesn't spin at all, in either
>> direction.
>
>
> It's also possible one of your brushes in the motor is gone. They can be
> replaced, but are a bit more of a pain.
>
>
> C
>
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak