[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Information on installing Lithium cells in my EGT 200 > and installation of bearing in the mower deck rollers.



You could install a 36v to 12v step down converter. There are a few on ebay for golf carts that put out 25-30A.

Or like you said you can just install a 12v battery. I do not use the stock charger, so i installed an old car battery that i had lying around in the front. Works just dandy.
__________________________________________________________________________________________________________
Admin
ge-electrak.com


> I have ordered 12 CALB 100Ah cells for my EGT-200, they should be here
> 7/19/2013. They are being supplied by Don Blazer. Two of the 12 are being
> supplied by my neighbor with the Electric Ford Ranger.
> I now have to figure out how to handle the 12v tap for my winch, lights, and
> the tap for the front lift. I cannot tap my Lithium pack, it would cause it
> to become unbalanced. I am thinking of adding a 12v AGM battery, (I have
> several laying around), with a DC-DC converter to keep it charged.