[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) Mower deck motor repair questions
Suggest cleaning up the pole and frame bore with some sandpaper.
JB Weld works well which is readily available. Position and don't goop
too much on underside as air gap is small.
...Walt
-----Original Message-----
From: David Tiefenbrunn [mailto:davidtief comcast net]
Sent: Thursday, June 06, 2013 12:54 AM
To: jim
Cc: elec-trak cosmos phy tufts edu
Subject: Re: (ET) Mower deck motor repair questions
On 6/5/2013 10:00 AM, jim wrote:
> I have one motor that worked fine until one of the magnets came loose.
> Has anyone figured out a method to re-install or re-glue the magnet
> into the motor shell? Kind of adhesive, method of positioning the magnet
> etc?
>
A very long time ago, I re glued one or 2. I probably used epoxy. Use
wood blocks & shims to press them into place.
--
David Tief. N1WWY Zumba(r) Instructor
Web page at: http://home.comcast.net/~davidtief/index.html
Fight Spam: http://www.hostedscripts.com/scripts/antispam.html
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo.cgi/elec-trak