I had posted a month or so ago that I did not have speeds 5,6,7,8, on my E-20. Got some advice, tried all suggestions but eventually got it straightened out. First I found a very poor (burned up) ring terminal at wire 55 at R2. Ran new wire 55 back to coil 2A, that didn’t do it, darn. Then as I was pacing the foot speed pedal while in neutral it occurred to me that although I could hear when coil 2A energized the motor speed did not change and as I kept pushing I could then hear coil 3A and then more motor speed. More testing and finally a replacement of 2A returned speeds 5,6,7 and 8!
Michael H. Finck
Vice President-Estimating
R.W. Setterlin Building Company
560 Harmon Ave.
Columbus, Ohio 43223
Direct Dial: 614-586-0247
Main Office: 614-459-7077
Estimating Fax: 614-545-5844
Website: www.setterlin.com
Email: m finck setterlin com