Re: (ET) Tractor repair: Taken all the parts off

["David Roden" <etpost drmm net>]

On 18 Sep 2010 at 19:25, Chris Zach wrote:

> should I use stainless ones when putting it back together? 

I just use good quality plated hardware (if such a thing still exists in 
this age when almost all hardware is made in China).  But I coat every 
bolt 
with anti-sieze compound, and sometimes even brush it onto the outside of 
the bolt and nut to help prevent rusting.  For years I did this with all 
the 
hardware in my ICEV's exhaust system.  I was always able to unbolt 
everything when it was time for a replacement.  Great stuff.


David Roden - Akron, Ohio, USA

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = 
Note: mail sent to the "etpost" address will not reach me.  To send 
me a private message, please use the address shown at the bottom
of this page : http://www.evdl.org/help/
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =