[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Inverters



Hi All
I have a Exeltech inverter with 36vdc input and 1100 watt 115vac output.
The model is XPK-T-B-6-1-02 and XP-1100
Bought it from Kansas Wind Power and the owner has several ETs.

I plug the Exelteck into the ET mower outlet.

I use the Exceltech to power my gas furnace when the power goes out in the 
winter.

Exeltech is very high quality and very accurate 60Hz regardless of load.

I have an old ET rotary inverter but its frequency varies with load.

Thanks,
Paul Holzschuher
Cincinnati

--- On Thu, 12/24/09, David Roden <etpost drmm net> wrote:

> From: David Roden <etpost drmm net>
> Subject: Re: (ET) Inverters
> To: Elec-trak cosmos phy tufts edu
> Date: Thursday, December 24, 2009, 6:56 PM
> Exeltech makes inverters for nominal
> voltages from 12 to 108 volts.  They 
> are quite pricey, especially compared to the generic
> Chinese-government-
> reference-design junk you see on Ebay.  However, they
> last forever and 
> produce sweet, clean, utility-grade pure sine wave power
> with lots of surge 
> headroom.  Made in USA, too.
> 
> http://www.exeltech.com/
> 
> Highly recommended if you have the pocket depth required,
> or can find an 
> affordable used unit.
> 
> 
> 
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>