[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) trouble...she no go
It looks like the switch is in series with the seat switch, so when open
it stops all power, IOW the f/r relay doesn't click. So I don't think that
is it, unless I am missing something
---------[ Received Mail Content ]----------
Subject : Re: (ET) trouble...she no go
Date : Sun, 10 Aug 2008 07:33:02 -0700 (PDT)
From : jim donovan <donovan66205 yahoo com>
To : e s <stupidemail5 lycos com>, Electric Tractor <elec-trak cosmos phy
tufts edu>
If it was working prior to doing brake work I would check the brake safety
micro-switch. Sounds like it is "on", meaning that the tractor will not
drive.
Just my thought.
Jim
--- On Sun, 8/10/08, e s wrote:
From: e s
Subject: (ET) trouble...she no go
To: Elec-trak cosmos phy tufts edu
Date: Sunday, August 10, 2008, 8:48 AM
So i replaced the fwd/rev relay and it ran just fine, plenty of battery, no
worries, just no brakes.
fixed the brakes [note, stupid placement of caliper, 1/2 inch different
and it
would be a 2 minute job]
Now she no go. Fwd rev relay clicks back and forth, but no power drain. PTO
lights lift all work
Have manuals but haven't deciphered the troubleshooting diagrams. Part of
the problem is lack of labeling on the machine
jumped out the brake and seat switch to test. no dice
hints welcome................
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak