If it was working prior to doing brake work I would check the brake safety micro-switch. Sounds like it is "on", meaning that the tractor will not drive.
Just my thought.
Jim
--- On Sun, 8/10/08, e s <stupidemail5 lycos com> wrote:
From: e s <stupidemail5 lycos com>
Subject: (ET) trouble...she no go
To: Elec-trak cosmos phy tufts edu
Date: Sunday, August 10, 2008, 8:48 AM
So i replaced the fwd/rev relay and it ran just fine, plenty of battery, no
worries, just no brakes.
fixed the brakes [note, stupid placement of caliper, 1/2 inch different and it
would be a 2 minute job]
Now she no go. Fwd rev relay clicks back and forth, but no power drain. PTO
lights lift all work
Have manuals but haven't deciphered the troubleshooting diagrams. Part of
the problem is lack of labeling on the machine
jumped out the brake and seat switch to test. no dice
hints welcome................
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
|