[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Alltrax install

Subject: Re: (ET) Alltrax install
From: "David Roden" <etpost drmm net>
Date: Sat, 09 Aug 2008 18:03:23 -0400
In-reply-to: <000e01c8fa30$0b5393a0$0201a8c0@tomt2vq5olb5ys>
List-archive: <http://cosmos.phy.tufts.edu/mhonarc/elec-trak>
List-help: <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=help>
List-id: Electric tractor discussion list <elec-trak.cosmos.phy.tufts.edu>
List-post: <mailto:elec-trak@cosmos.phy.tufts.edu>
List-subscribe: <https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak>, <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=subscribe>
List-unsubscribe: <https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak>, <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=unsubscribe>
Priority: normal
References: <000e01c8fa30$0b5393a0$0201a8c0@tomt2vq5olb5ys>
Reply-to: noaddress drmm net

On 9 Aug 2008 at 10:56, Tom Klein wrote:

> I don't have the skill (yet) to read the wiring diagram supplied by
> Alltrax. 

AFAIK, that diagram is the only official documentation that exists for the 
installation.  You might visit your public library and see if you can find 
some basic electricity books that will help you learn how to read 
schematic 
diagrams.

It's been a few years now since I fitted the Alltrax to my ET.  I don't 
really recall what I did with the PTO relays.

David Roden - Akron, Ohio, USA

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = 
Note: mail sent to the "etpost" address will not reach me.  To send 
me a private message, please use the address shown at the bottom
of this page : http://www.evdl.org/help/
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

References:
- (ET) Alltrax install
  - From: Tom Klein

Prev by Date: Re: (ET) Modern Electric Tractor, Inc
Next by Date: Re: (ET) Alltrax install
Previous by thread: (ET) Alltrax install
Next by thread: Re: (ET) Alltrax install
Index(es):
- Date
- Thread