[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) Recommendations for modern replacements for the electronics?
On 2 Jul 2008 at 20:37, Darryl McMahon wrote:
> the Lesters I used were generally aggressive on the finishing charge and
> relied completely on the timer to prevent excessive damage.
I've never contacted Lester for confirmation on this, but I've heard that
the Lestronic chargers (and possibly others) come in two "flavors." One
uses an 8 amp finish, the other a 5 amp. The former are indeed a bit
rough
on golf car batteries; the latter are much gentler.
I think Lee Hart told me once that he knew a way to reduce the finish
current on the 8 amp boilers.
David Roden - Akron, Ohio, USA
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Note: mail sent to the "etpost" address will not reach me. To send
me a private message, please use the address shown at the bottom
of this page : http://www.evdl.org/help/
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =