[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

(ET) R1 and R2 material

Subject: (ET) R1 and R2 material
From: Bill Alburty <willaim kc rr com>
Date: Sun, 27 May 2007 23:53:46 -0500
List-archive: <http://cosmos.phy.tufts.edu/mhonarc/elec-trak>
List-help: <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=help>
List-id: Electric tractor discussion list <elec-trak.cosmos.phy.tufts.edu>
List-post: <mailto:elec-trak@cosmos.phy.tufts.edu>
List-subscribe: <https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak>, <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=subscribe>
List-unsubscribe: <https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak>, <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=unsubscribe>
User-agent: Thunderbird 1.5.0.10 (Windows/20070221)

Anybody know what metal strapping material is used for the R1 and R2resistors on an E-12? Its 1/2 wide and about 1/16 thick and is prettyhard. R1 and R2 are both about 1.5 ohms. I suspect this is some commonmaterial readily available. Any help would be appreciated.

Bill Alburty

Follow-Ups:
- Re: (ET) R1 and R2 material - Nichrome ribbon ?
  - From: JBR

Prev by Date: (ET) 2rtn
Next by Date: Re: (ET) R1 and R2 material - Nichrome ribbon ?
Previous by thread: (ET) 2rtn
Next by thread: Re: (ET) R1 and R2 material - Nichrome ribbon ?
Index(es):
- Date
- Thread