----- Original Message -----
Sent: Tuesday, September 12, 2006 8:14
PM
Subject: (ET) E20 problem
Hi All hope everyone is enjoying the fall weather
we are gewtting in NW Ohio...that's not the problem..the problem is .. I
tested the controls after mod on the bench, works fine..last week tested her
laying on the tractor, temp hookup wires 8, 24, 36, 62, motor spins ( both
F/R)..so we throw some paint at her, it's dry, put control panel back in
hooked up the wires an plugs ..testing meter on wires 36
an 62, hit foot swt read 37.6vdc(f/r) all relays working but no
motor???. ok hook meter to wires 8 an 24 an get 37.6 F/R AND read -26.6
without the foot swt in..still no motor..spin motor by hand ,still no
motor...can I test the motor by hooking right to the motor ( 8 an 24) an hook
jumper to 36 an 62 for the field?? thanks in advance
Jerry NW Ohio
_______________________________________________
Elec-trak mailing
list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak