[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) e-14 heat from timer while charging



On 30 Aug 2006 at 20:05, Daniel Childress wrote:

> Checked the amperage going into and out of the timer.  18.3 amps.  

Is that the current from the AC line, or the current supplied to the 
batteries?

> The  connection at the timer seems to have  a  short.  Upon 
> moving the  wires that attach to the  timer the  hum of the  charger 
> quits.  Slight movement of the wires "at the wire spade connections 
> on the timer" it  seems to turn back on

That would be an intermittent open connection, not a short circuit.


David Roden - Akron, Ohio, USA

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = 
Note: mail sent to the "etpost" address will not reach me.  To send 
me a private message, please use the address shown at the bottom
of this page : http://www.evdl.org/help/
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
The illegal we do immediately. The unconstitutional takes a 
little longer. 

                                        -- Henry Kissinger

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =