Re: (ET) OT ET charger - is output inductive ? Out volts = 200+ ?

[JBR <reinharj frontiernet net>]

Vague recollection:  Didn't one of the GM electric cars have an inductive 
output connector on its charger ?

Also, if 30 amps output, and 6600 watts, is this charger putting out about 
200 
volts ?  

Or was that 220 volts at 30 amps input & the output is totally unknown 
volts/amps ?

What was traction pack voltage on various GM electric cars?

On Wednesday 09 August 2006 10:01 pm, Jerry Rhodes wrote:
> Harry, sure would make one he...l of a battery charger for a ET/EV drager
> an ET Puller....now to work out the max  amps the batteries can take in
> ..say 10 minutes without smoking and I bet it weights a ton...
> Jerry NW Ohio
>
> ----- Original Message -----
> From: "harry landis" <hlandis hotmail com>
> To: <elec-trak cosmos phy tufts edu>
> Sent: Wednesday, August 09, 2006 9:19 PM
> Subject: (ET) OT ET charger
>
> > Probably not quite ET stuff, but a friend has a charger that appears to
> > be for an EV-1. It is about 5' tall, maybe 10 x 15 inches around, says
> > Magnecharger on the front,  the nameplate says it is by Delco 
> > Electronics
> > Power Control Systems, Floor Mount EV Battery Charger FM200, 208-240
> > input,
> > 30 amps, output 6600 watts max, made in 1997.
> > Is it useful/valuable?
> >
> > Thanks,
> >
> > Harry Landis
> >