Most of the time, I can't get the 3rd speed to work on my E12. Have
done some testing but if its a bad connection, I have not been able to
find it. With help, have temporarily put in a bypass circuit with spare
contactor in parallel with contactor 2A over to wire #25 that gets me
from 2nd to third speed and holds it (after hitting the power pulse
switch). In studying ET literature, I found a flow chart that says to
check diode CR12 on the Varistor assembly. I re-soldered the ends to
the Varistor board but no change. Would like to replace this CR12
diode. I know very little about this type of thing and went to Radio
Shack but they knew nothing. Can anyone help in identifying this diode
for me so that I can locate and buy a new one?
Thanks in advance,
Richard "Zack" Zachary
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak