FW: RE: (ET) Another lesson learned

["Pestka, Dennis J" <Dennis Pestka TycoHealthcare com>]

 F.Y.I.

-----Original Message-----
From: CleanPower [mailto:cleanpower att net] 
Sent: Wednesday, August 31, 2005 4:52 PM
To: "Pestka,Dennis Pestka TycoHealthcare com
Subject: Re:RE: (ET) Another lesson learned

Dennis,
 That's right,it does,I felt that was an important device.
 Thanks,
Harold
--------------------------------------------------------------
 The replacement switch that I got from Harold looks like it has a fusible
link on it.

Dennis

-----Original Message-----
From: elec-trak-bounces cosmos phy tufts edu
[mailto:elec-trak-bounces cosmos phy tufts edu] On Behalf Of Christopher
Zach
Sent: Wednesday, August 31, 2005 11:14 AM
To: 'Elec-Trak Email Discussion List'
Subject: Re: (ET) Another lesson learned

> May want to see if you are experiencing any voltage drop through your 
> switch if you experience the same symptoms.

Yup. The factory disconnects are old and crud. Remember if you replace them
you need to put in some sort of fuse, as the old ones had a fusable link in
there as well.

Also check out your contactors; a loose wire will cause them to run 
hot=less
power.

Chris


> 
> Dennis
> Elsberry, MO
> 
> 
> 
> 
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak



_______________________________________________ Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak

_______________________________________________ Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak