[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

(ET) Re: E12 diagnostics

Hi Guys,
Thanks for everyone's suggestions.  I have found two leads to the stoppage,
-lack of resistance across the main motor connections
-very low (0.2v) field voltage at the motor (J6 plug)
Will investigate further this weekend.
Thanks again,
Richard "Zack" Zachary
Keith & Nancy Stieg wrote:
Message
Hi Richard
 
Did you get your 12 running? If not, check the first micro switch on the throttle control
I have seen this one go bad more than once If the start sequence switch is bad it won't
move forward or reverse.
 
Keith Stieg     MPLS.MN. 763-425-6246