RE: (ET) Need diagnositic help on E12

["Markus Lorch" <mlorch vt edu>]

My schematic (E20CA) shows that while the power to the PTO contactor
contacts is not interrupted by CB-1 (the motor klixon circuit breaker)
the power to the controls is and thus the PTO contactor would cannot
be engaged if CB-1 is open. 

I think the only thing that should work with CB1 open should
be the lights. The battery (voltage) meter VM1 should read zero.

Markus

> -----Original Message-----
> From: elec-trak-bounces cosmos phy tufts edu 
> [mailto:elec-trak-bounces cosmos phy tufts edu] On Behalf Of SteveS
> Sent: Thursday, March 17, 2005 9:26 AM
> To: et
> Subject: Re: (ET) Need diagnositic help on E12
> 
> 
> 
> - My schematic (E15) shows the motor mounted breaker cutting off 
> everything BUT the PTO. Of course I'm still off base because then the 
> lift wouldn't work.
> 
> - SteveS
> 
> 
> RJ Kanary wrote:
> 
> > If that circuit breaker fails, nothing but the lift will work.Since 
> > the PTO is still live, that is unlikely to be the source of trouble.
> >
> > ----- Original Message ----- From: "steveS" <ssawtelle verizon net>
> > To: "et" <Elec-trak cosmos phy tufts edu>
> > Sent: Tuesday, March 15, 2005 7:45 PM
> > Subject: Re: (ET) Need diagnositic help on E12
> >
> >
> >> Check that the circuit breaker on the motor has continuity. I have 
> >> seen two that open circuited because the screw adjsument 
> had corroded 
> >> away.
> >>
> >> - Steve
> >>
> >
> 
> 
> 
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>