Hey! I might have learned something, but I will have to try it to be
sure. HMMM I wonder what effect the
start winding and start switch have on it? Could the capacitor be put
on the start winding instead of the switch to get more power out of
it? AHHH - More things
to do - less time to do them.
Ralph
Christopher Zach wrote:
The key
is capacitors and residual magnetism in the stator core. When you spin
it up it will generate a very small charge, which can then charge up a
bank of say 200mfd of motor run capacitors in parallel with the output.
The caps then keep the field going.
If there is no residual magnetism you can "flash" it with a 1-2 second
shot from a DC source (say an Elec-trak battery :-) Then it will be
magnetized and will fire up. The way to lose the magnetism is to power
it down with a load connected; to keep it you disconnect the load
before powering down.
An excellent article is here:
http://www.qsl.net/ns8o/Induction_Generator.html
Chris
Ralph G Vogan wrote:
How can an induction A.C. motor act as a
generator? They have no armature winding and any residue magnetism in
the field will not create a current in the non-rotating field.
A a.c.-d.c. motor is a series motor. It will output a uncontrolled
d.c. voltage if used as a generator, If it outputs anything at all.
a three phase a.c. motor is also an induction motor. If you put a.c.
into one winding you will get a.c. out of the other windings if it is
rotating, but it is just acting like a transformer not a generator.
Ralph V
ralphgv centurytel net <mailto:ralphgv centurytel net>
ET Web page
http://ralphgv.tripod.com/
------------------------------------------------------------------------
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
|