Re: (ET) Trans axel pulley, FOUND! Pictures!

["Dave & Deb" <daveb drizzle com>]

nice cables. but what are these "re-usable compression clamps"  where did
you get them?  on the web?  local hardware?
thanks,
Dave

>
>
> Thanks to everyone who offered to help. I was able to locate a
> replacement pulley locally that worked much better than the original
> one. The pulley is in two parts, inter hub and outer pulley.
>
>
>
> Pictures, battery clamps. (Best loaded over a broad band connection)
>
>
>
> https://www.slashtmp.iu.edu/public/download.php?FILE=hazen/87059sye5W5
>
>
>
> https://www.slashtmp.iu.edu/public/download.php?FILE=hazen/93036gt9M9A
>
>
>
> I use thick copper compression clamps and 4 gauge multi strand copper
> wire. The clamps are about $3.50 each and they are reusable. Never had
> any more heating problems after switching to the thick copper clamps. I
> fused the lights and front lift directly at the battery and removed the
> under the hood fuse holder.
>
>
>
> Picture, Alltrax controller installation, not done yet. I was unable to
> use the hand controller due to the micro switches being normally open. I
> have ordered the Alltrax pot box. I was able to drive the Elec-Trak this
> week end in the basement using the new controller, it's like getting a
> NEW tractor!
>
>
>
> https://www.slashtmp.iu.edu/public/download.php?FILE=hazen/44796EWz39H
>
>
>
>  Dwight
>
>
>
>
>
>
>
> Dwight L. Hazen
>
> Ham Radio wb9tlh arrl net http://wb9tlh.ampr.us
>
> People never lie so much as after fishing, during a war, or before an
> election.
>
>   _____
>
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>