(ET) Pictures of tiller mount, two styles of E20 breaks, and homemade tiller bar attachments

["Markus Lorch" <mlorch vt edu>]

Guys,

Today I gave my lawn the last cut of the season, cleaned
the mower real good, and charged all my batteries ...
next step is to mount the blade but I doubt I get to use it
before January.

Chris asked a little while ago about how the tiller bar is
mounted to the rear axle. I had my rear wheel off on my two
E20s today and took some pictures. The pictures are those that
start with 112003-et-rear-axle.... at 
http://markus.lorch.net/et/more-pics/small/

The pictures also show two different break styles, the older
E20 has a longer break pad 
(see 112004-et-rear-axle-standard-with-older-break.jpg)
where as the newer is a round puck
(see 112004-et-rear-axle-with-tiller-support-and-newer-break-01.jpg).
Is there an even newer style than what I consider the new style?

I also added a couple of pictures on two wooden attachments
that I made for a few bucks. One is a little wooden deck to 
move things around (112004-et-rear-bed-1.jpg) and the other
is a 48" dethatcher for about $10 (102004-et-ten-dollar-dethatcher-01.jpg)
Both are attached to the tiller bar. 

Markus