What model is your E-20? Mine is an 8 speed CA model, and cruise
is NOT locked out in Reverse.Reverse problems are usually found to exist
on the card edge connector. Look there first.
----- Original Message ----- From: "Chris Zach" <czach computer org>
To: "Elec-trak list" <elec-trak cosmos phy tufts edu>
Sent: Saturday, October 23, 2004 4:44 PM
Subject: (ET) Odd reverse behaviour
Ok, this is a bit odd and needs to be fixed.
My E20 has a problem with reverse. If you go into reverse and press down
on the pedal slowly you get into speed 1, but never higher than that
(speeds 2,3,4 ignored). If you floor the pedal quickly you get into
speed 3, then 2,1 as you let up. Go to zero, press the pedal normally
and you only go to 1.
I know the E20 has a lockout in series with the FW resistors to lock out
speeds 5-8 and the cruise control in reverse, but why no speeds other
than 1 unless I floor it fast?
Odd. FWIW, I watched the relays, no difference. Forward works perfectly.
Chris
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak