RE: (ET) mower blade runout, now used 12 M motor

["Elie, Larry \(L.D.\)" <lelie ford com>]

If you get the runout to .002", the tip will be .020" or less.  It works.

Larry Elie


-----Original Message-----
From: elec-trak-bounces cosmos phy tufts edu
[mailto:elec-trak-bounces cosmos phy tufts edu]On Behalf Of Thon Basom
Sent: Tuesday, September 14, 2004 5:34 PM
To: elec-trak
Subject: (ET) mower blade runout, now used 12 M motor


Well,  by rotating the blades slightly on the hubs I was able to get 2 of
the 3 blades to 'wobble' maybe an 1/8 inch or less, at the tips.  The 3rd
shaft is ugly though.  I'm going to try to find a lathe and wallop on it 
per
Larry's instructions (looks like you've gotten more stringent--IIRC you 
only
said .002 runout in the archives!). ;-)  May not have much luck with this
though, so if anyone's got a decent used 12M mower motor they'd like to
sell, please let me know.
Thanks.
Thon
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.749 / Virus Database: 501 - Release Date: 9/1/2004


_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak