Re: (ET) mower motor misc.

["Tim" <rimmer59 hbci com>]

On #2, I can get the other two motors to barely turn when I spin the third
almost as fast as I can.  Also, the main mower deck plug cannot be plugged
into the PTO during this test.
Tim

----- Original Message ----- 
From: "Thon Basom" <tbamc gbta net>
To: "elec-trak" <elec-trak cosmos phy tufts edu>
Sent: Tuesday, August 10, 2004 5:13 PM
Subject: (ET) mower motor misc.


> I'm trying to resurrect an E12M and have a couple questions I couldn't
find
> answers to in the archives:
>
> 1. Is, what I presume is called the blade holder, supposed to be flush
with
> the end of the motor shaft?  On 2 out of 3 of mine the shaft sits about
> 1/16" or so proud of the holder.
>
> 2.  All my motors turn easily, and spin when 12v is briefly applied.
> However, if I spin one by hand, neither of the other 2 will spin.  A
couple
> times the archives have mentioned this.  Should I probe this further
before
> hooking all up to 36v?
>
> Many thanks.
> Thon
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.734 / Virus Database: 488 - Release Date: 8/4/2004
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak