[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fw: (ET) E10 operation



On all the models I am familiar with,  the drive motor is turned off by
either the key switch or the seat switch.

Herb Crary
Boulder CO

----- Original Message ----- 
From: "Mr. Shannon Aldinger" <shannon yinyang hjsoft com>
To: "Jim Coate" <jbc coate org>
Cc: "Elec-Trak" <elec-trak cosmos phy tufts edu>
Sent: Wednesday, July 14, 2004 8:47 PM
Subject: Re: (ET) E10 operation


> On Wed, 14 Jul 2004, Jim Coate wrote:
>
> > I was looking at the schematics for an E10 and trying to figure out how
they
> > work. I understand that the motor is simply on/off and once running
speed is
> > changed with the clutch and transmission.
> >
> > But to turn the motor off, it appears the key switch must be turned 
> > off.
Is
> > this correct?
> >
>
> I have no experience with an E-10, but that sounds the same as how my 
> E-8m
> works.
>
> ---
> Shannon Aldinger
> http://www.aldinger.us/elec-trak/
> 19?? GE E-15 w/ Front Mower Deck
> 1977 GE E-8M
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>