Re: (ET) Alltrax...more help

["RJ Kanary" <rjkanary nauticom net>]

   What is the complete Model Number, as it appears on the Data Plate? This
will make referring to the Homeowner's Service Manual much easier, to
identify all the wires in question.
          Lacking that, does your I-5 have three armature resistors, or 
just
two?
     Does the Cruise Control have only one speed, or the option of two? I
realize that none of this will matter, AFTER the installation, but to avoid
having to trace wiring out the hard way, it's quicker to know which
variation we are working with.
     The folks at GE were sharp enough to number the wires at both ends.
Makes puzzling things out much easier......................if you know 
which
model you are working on. ;)
----- Original Message ----- 
From: "john briese" <goodguyforsure hotmail com>
To: <elec-trak cosmos phy tufts edu>
Sent: Monday, July 05, 2004 10:33 AM
Subject: (ET) Alltrax...more help


> I am looking at the motor. There are two heavy gage red wires on a "knob"
on
> towards the front of the tractor  and a black and red wire on individual
> lugs on the back of the motor...which pair is the field? Also I have 4
light
> gage wire coming out the other end..how do I identify what these are.
> thanks
> John Briese
>
> _________________________________________________________________
> MSN 9 Dial-up Internet Access helps fight spam and pop-ups – now 2 months
> FREE! http://join.msn.click-url.com/go/onm00200361ave/direct/01/
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>