[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: (ET) Mower deck rollers and blade to motor spacers



It is a fiber washer - serves as a break away if the blade hits something. 
To see a new one check this ebay site 
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2391699409&category=50370.

Gery Bauman
1 New Idea 150
> 
> From: Rod Hower <rodhower ameritech net>
> Date: 2004/03/31 Wed PM 09:00:45 EST
> To: elec-trak cosmos phy tufts edu
> Subject: Re: (ET) Mower deck rollers and blade to motor spacers
> 
> I found some 2.25" OD with 1.25" ID Phanalic
> roller material at work.  I cut these to the
> same length as each of the original rollers.
> I plan on using PVC tubing to take up the extra
> ID space on the original Etrak roller bar.
> This Phanalic material should last forever, so on
> to the next problem.
> I re-tapped the adjustment screw holes for the roller
> deck and aquired some new adjustment screws.
> So the next task is making an adapter for the motor
> to mower blade.
> The original setup had some type of material between
> the blade and the motor adapter.  Anybody know what
> this material is made of?
> Thanks,
> Rod
> 
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>